Spectro MAXx BT C型20140108

更新:2014-3-5 21:14:26      点击:
  • 品牌:   
  • 型号:   
  • 市场价:    元
  • 优惠价:    元 (已有 0 人购买)
  • 在线订购   加入收藏
产品介绍

第一部分: 分析程序

B.  Analytical Program

 

The instrument is calibrated with limited international standard which Spectro Analytical Instruments GmbH have for general purpose. For special alloy and special elements, the instrument must be calibrated by customer themselves.

以下工作曲线由德国斯派克分析仪器公司用国际标准样品进行绘制(通道线性范围大于以下工作曲线范围)。对于用户提出的特殊合金、元素及分析范围,将由用户提供标样,斯派克公司免费绘制。

 

 

元素

碳素钢和中低合金钢

铸铁

不锈钢和高合金钢

 

 

Fe-10

Fe-20

Fe-30

 

 

%

%

%

1

C

0.0015--1.45

1.4--4.35

0.0015--2.5

2

Si

0.001--4

0.002--3.5

0.005--4.2

3

Mn

0.0005--2.3

0.001--4.1

0.001--15.2

4

P

0.0005--0.13

0.0005--2.4

0.001--0.14

5

S

0.0005--0.12

0.0005--0.24

0.001--0.4

6

Cr

0.001--7

0.001--7

0.001--32

7

Mo

0.0015--4

0.0015--2.2

0.0015--7

8

Ni

0.0015--5.5

0.0015--7

0.0015--35

9

Al

0.001--2

0.001--0.15

0.001--2.8

10

Co

0.002--2.4

0.002--0.21

0.002--21

11

Cu

0.0005--1.2

0.0005--2.5

0.0005--7.2

12

Nb

0.001--0.32

0.001--0.45

0.004--3

13

Ti

0.0007--0.82

0.0007--0.45

0.0007--3.2

14

V

0.0005--1.1

0.0005--0.62

0.0005--5

15

W

0.01--3.1

0.01--0.13

0.01--5

16

Pb

0.003--0.2

0.003--0.06

0.003--0.11

17

Sn

0.0005--0.14

0.0005--0.24

0.0005--0.2

18

Mg

 

0.001--0.13

 

19

B

0.0002--0.014

0.0002--0.11

0.0002--0.02

20

Fe

余量

余量

余量

 


第二部分: 仪器技术配置

C.     Description

 

The SPECTROMAXx consists of the following components:

SPECTROMAXx 直读光谱仪由以下部分组成:

Optic 

光学系统

Spark stand

火花台

Spark source

火花光源

Spectrometer control

光谱仪控制系统

Readout system

数据读出系统

Spark Analyzer Pro Max Software

Spark Analyzer Pro 分析软件

 

DESCRIPTION OF THE COMPONENTS

各组成部件的描述

 

Optic   光学系统

High resolution Multi detectors

多个高分辨率检测器

Stabilized against fluctuations in temperature

抗温度波动稳定结构

Drift free due to the material used

采用不产生飘移材料

Automated profiling

自动描迹

 

Analysis Modules  分析模式

Freely selectable analytical modules

灵活选择分析模式

Optimized to customer requirements

根据用户具体分析要求进行优化

Easily, on site addition of additional modules

方便在用户现场增加分析模式

 

Spark Stand  火花台

Open spark stand for high sample throughput

开放式火花台,快速样品切换

Analysis of samples with various kinds of geometrics

适于分析各种几何形状的样品

Optimized Argon flow

氩气流优化

Minimized Argon consumption ( Argon Saver Module)

最小氩气消耗设计(氩气节约模式)

Reduced cleaning intervals

减少清理次数

Table plate easily exchangeable

易于更换的火花台板

Temperature absorbent design, water cooling not required

热量吸收装置设计,无需水冷

Integrated shutter system for optimum plasma viewing

集成快门系统,实现最佳等离子观测角度切换

 

激发系统
Excitation System

全数字等离子发生器。数字放电参数设定,数字脉冲发生器,数字离线脉冲控制。

Fully digitalized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control

32 MHz 微处理器控制

32 MHz micro-controller

数据读出率:200微秒放电400次

Sampling rate: 400 in200ms-discharge

能量分辨率:125 毫瓦

Energy resolution: 125 mW

最长单次火花放电时间:4000 微秒

Max. spark duration:  4000ms

最大火花功率:4 千瓦

Max. spark power 4 KW

 

Readout system 读出系统

High Speed 12 Bit ADC

高速 12位AD 转换

DSP-Controller with 66 MHz

66 MHz DSP 控制器

Serial Source-Interface

光源配有串行接口

 

Spectrometer PC Control 光谱仪控制用计算机系统

External computer system 

外接控制用计算机系统

Operating system Windows™

Windows™ 操作系统

Keyboard and mouse

键盘和鼠标

TFT LCD Display

液晶显示屏

Printer

打印机


SparkAnalyzer Vision Mx Software (64bit)分析软件

General 总体功能

ICAL – Intelligent Calibration Logic (only one sample for standardization)

ICAL-智能逻辑校正(标准化只需一个标样)

Visualized diagnostic system for maintenance request  and real time System diagnostic

硬件状态诊断实时显示系统,维护计划设计及提示

Software controlled Argon-Saver-Module

软件控制氩气节约模式

User friendly system surface under windows

Windows 环境用户友好界面

Function keys for routine operation

日常操作功能键控制

Configuration of different User Levels

不同用户层级参数设置

Multiple language support (pre-configured languages are GER, ENG)

多语言支持(预设英语,德语)

Result Manager

结果管理器数据管理软件


Calibration Software  校正软件

Curve fit up to cubic equation

三次方程回归曲线

Calculation of spectral interferences and interelement corrections

自动或手动进行谱线和共存元素校正

Graphic display of calibration curves with zoom function and calculated correction factors

校正曲线的图象显示, 可进行缩义和校正系数计算

Identification of calibration standards by alloy-group

合金类别分组校正标样的

Standards library

标样库


Measurement 测量

Calculation of concentration proportions using calibration polynome

采用多项式校正方法计算浓度比例

Automatic switch over of spectral lines according to their concentration ranges

根据元素的浓度自动选择分析谱线

Matrix correction

基体校正

Material (quality) specific Type recalibration

材料(牌号)类型再校正

Automatic program selection (APF)

自动分析程序切换

Dynamic Pre-Spark Mode

动态预燃时间设定模式

Flagging of results beyond calibration range

标记超出工作曲线浓度范围的分析结果

Input and calculation of user defined formulas

按照用户自定义的公式输入并进行计算

Input of user-defined sample identity codes

用户自定义样品识别代码的输入

Free editable quality data base

灵活编辑数据库

Quality check function

牌号核对功能

Quality identification function

牌号鉴定功能


Output 数据输出

Output of results in various concentrations and intensity mode

分析结果采用浓度和强度多种显示模式

Concentration unit selectable (%, ppm)

%, ppm浓度显示单位可选

Output of statistical data (e.g. average of up to 50 single sparks, rel. standard deviation)

统计结果输出(多至50次激发结果的平均值及相对标准偏差等的计算)

Average calculation manual set with the possibility to switch back to single sparks

手动平均值的计算, 且可回到单次火花分析结果

Common output for gliding average and single sparks on screen

平均值和单次火花值的屏显

Fonts, font-size, count of single sparks, etc. are freely configurable

显示字体, 字体大小, 单次火花计数等可灵活设置

Automatic and/or user controlled printout of analytical results and statistical data

自动或手动分析和统计结果的打印输出

Automatic and/or user controlled storage of analytical results and statistical data

自动或手动分析和统计结果的存贮

Transmission of results to remote printers and/or terminals

远程打印机和/或终端的结果传输

Transmission of results via TCP/IP

通过TCP/IP协议进行数据传输


Electrical Requirements 电源供给

230 V  + 10 % / - 10 %, 50 Hz

max. 400VA during spark mode

在激发时, 最大400VA

16 Aslow-blow fuse

16A慢熔保险丝

 

Temperature range  温度范围

+10°C- +30°C

 

Air humidity range 湿度

20 – 80%

 

Argon inlet pressure 氩气输入压力

7 bar 

 

Argon quality (min.)  氩气质量

5.0 (99.999% Ar)

 

Argon flow rates 氩气流量

常流量Constant flow 29 l/h


分析流量Analytical flow    209 l/h


第三部分: 售后服务及其它

D.   Service and Miscellanea

 

1. 安装调试,培训和设备移交 Commissioning


合同总价包括安装调试,仪器操作培训,设备移交用户。在用户现场安装调试,培训和验收的工作时间总计不超过3天。额外的工作需要另外收费。设备移交以设备验收为终结。验收展示分析系统的完美运行,仪器性能和供货范围满足合同描述,由双方代表签订验收报告。安装之前,买方必须按照卖方提供的安装条件要求准备好安装条件。如果由于买方原因导致验收没有完成,再次验收需要另外收费。

The total price includes installation, commissioning of the analytical instrument and a basic training of its operation. The on-site installation and commissioning time of the system is limited to max. 3 days. Additional requirements such as (but not limited to) analytical help, training etc. will be invoiced. The commissioning is completed with an acceptance test, which shall demonstrate the perfect operation of the analytical instruments. Upon fulfilment of the Spectro specifications of the quoted analytical instrument, the acceptance protocol has to be issued and signed by both parties. Prior to commissioning, the laboratory and all necessary facilities for the commissioning of quoted analytical instruments must be fulfilled by the purchaser/end user according to the installation requirements which provided by Seller. Any reason caused by purchaser/end user to lead the failing of commissioning, the re-commissioning will be invoiced.

 

2. 保修期Warranty


保修期为验收后12个月或从德国发票日期之日起18个月,以先到者为准。除因用户使用不当造成的损坏以外,保修期内,德国斯派克分析仪器公司负责为用户免费维修或更换相应损坏部件。

The warranty period is 12 months after acceptance or 18 month from invoice date, whatever occurs first. All faulty components will be repaired or replaced free of charge, except for damages caused by customer's negligence.

供方负责终身维修。保修期外,供方应继续向用户提供优质服务。

The Seller should always provide the buyer with good service after warranty.

供方设有备件保税仓库,保证备件供应。

The Seller must supply the spare parts to the buyer in time.

 

3. 验收Acceptance


用再校准标样进行技术验收。

The international standard samples will be selected during acceptance.

按合同规定的供货范围进行清点验收。

The quantity will be checked according to the supply scope of the contract.


4. 海关税号  Customs Tariff No.

根据布鲁塞尔海关条约,仪器的海关税号为90.27.30.00

For this type of instrument Customs Tariff No. 90.27.30.00 has to be applied according to the Brussels Customs Tariff Scheme.


5.    设备原产地 Country of origin

除非特别说明,本报价涵盖所有供货范围原产地为联邦德国。

Except where otherwise stated, country of origin of the items quoted in this offer is the Federal Republic of Germany.

更多产品